Velleman HOMEGUARD VCC2 Manual De Instrucciones página 21

4) Hide DSR
A 'minimise' button will be placed in the top right hand corner of the DSR display window frame.
Click the 'minimise' button to hide the DSR display window.
5) PTZ Control Enable
Enables the PTZ function.
6) Select Drive to Record
-- By default, all available hard drive(s) are used for recording.
-- The C-drive is used for system and memory swapping, it is recommended not to use it for video
recording.
-- It is recommended to install hard drive(s) with at least 15GB for recording purposes.
7) Time Stamp
The user selects and enables date and time overlay to each camera for display and recording.
8) Video Server User
Prior to using the DSR, the remote 'online viewing' users should be registered through the 'video server
user manager'. Click the 'password protection' box at the bottom to enable the password protection of
the server. There will be no password protection in if the 'password protection' box is not checked. You
can add new users, edit existing user information or delete a user by clicking the corresponding buttons.
Each user entry has a name, password, time limit for continuous logon and camera restriction settings.
h. FAQ
Q1: How can I setup my OS system as I plan to install the HomeGuard program?
A1:
1) BIOS setting: please disable all unnecessary IRQ's, e.g. COM PORT, USB, SOUND, etc.
2) Hard disk partition of primary disk
a) the primary disk in Win98/WinME requires a minimum of 2047 MB (2 GB)
b) the primary disk in Win2000 / WinXP requires a minimum of 4096 MB (4 GB)
3) in the Windows system, go to 'control panel', 'power options' and choose 'always on' as the
setting for power schemes.
4) CD-ROM: the best and fastest setting is 'no pre-read'.
5) Install and update the program of the mainboard's chipset like INTEL, SIS, VIA etc.
6) Install the latest VGA driver like Nvidia, ATI, S3, etc.
7) Install DirectX 8.0 or a higher version. You can download it from Microsoft website.
8) Display resolution: please adjust your monitor resolution to 800X600 (NTSC) or
1024x768(PAL).
9) Monitor refresh frequency: please adjust it to 60MHz or to the default value.
Q2 : The video of my HomeGuard program will jump and down...
A2 : Please check for any damage to your camera, check the cable or video input connection; if there
are no problems, please update the newest driver of the main board, VGA card, or DirectX.
VCC2
21
VELLEMAN