WARNINg:
Clear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or loose string which
can become entangled in the cutting blade and create a
risk of electric shock and serious personal injury.
When operating the hedge trimmer, keep the extension
cord behind the trimmer. Never drape it over the hedge
being trimmed.
Do not force the hedge trimmer through heavy shrubbery.
This can cause the blades to bind and slow down. If the
blades slow down, reduce the pace.
Do not attempt to cut stems or twigs that are larger than
3/8 in. thick for the UT44110B or 1/2 in. thick for the
UT44121A, or those obviously too large to feed into the
cutting blade. Use a non-powered hand saw or pruning
saw to trim large stems.
WARNINg
If blades do become jammed, stop the motor, allow the
blades to stop, and disconnect the plug from the power
source before attempting to remove the obstruction. Fail-
ure to follow these steps could result in accidental starting
of the hedge trimmer and cause serious personal injury.
If desired, you can use a string to help cut your hedge
level. Decide how high you want the hedge. Stretch a
piece of string along the hedge at the desired height.
Trim the hedge just above the guide line of string. Trim
the side of a hedge so that it will be slightly narrower at
the top. More of the hedge will be exposed when shaped
this way, and it will be more uniform.
All manuals and user guides at all-guides.com
OPERATION
Wear gloves when trimming thorny or prickly growth.
OPERATINg THE HEDgE TRIMMER
Always hold hedge trimmer with both hands when op-
Stand so that you are stable and balanced on both feet.
Inspect and clear the area of any hidden objects.
Never use the hedge trimmer near power lines, fencing,
Never use a blade after hitting a hard object without first
Page 11 – English
When trimming new growth, use a wide sweeping action,
so that the stems are fed directly into the cutting blade.
Older growth will have thicker stems and will be trimmed
easiest by using a sawing movement.
WARNINg:
Read the safety information for safe operation using the
blade. Extreme care must be taken when using blades to
ensure safe operation. Refer to Important Safety Instruc-
tions and Specific Safety Rules.
erating. Use a firm grip on the handles. The unit is used
for cutting in either direction in a slow, sweeping action
from side to side.
Do not overreach.
posts, buildings, or other immovable objects.
inspecting it for damage. Do not use if any damage is
detected.