Maintenance - Panduit CT-2980/L Manual Del Usuario

Keep the tool head and tool body portion clean and free from debris. Soap and a damp cloth should
be used to clean the tool body.
Always store the tool in its clean, dry carrying case when not in use.
DO NOT press trigger and release button simultaneously. Damage to trigger linkage may result.
Always point tool away from others.
If the tool is kept in cold temperatures below 23
the tool to room temperature for 1 hour before using.
Avoid dropping the tool. Extreme shock may damage the hydraulic circuit and result in malfunction
of the tool.
Always verify the proper size connector for the conductor, by checking the color code and the
printing on the connector.
NOTE: CONNECTIONS UTILIZING THIS TOOL ARE U.L. LISTED AND C.S.A. CERTIFIED ONLY WHEN PANDUIT
COPPER COMPRESSION CONNECTORS ARE USED. USE OF ANY OTHER BRAND OF COMPRESSION
CONNECTORS IS NOT RECOMMENDED.
Consult product packaging, Panduit catalog or website for information on recommended
connectors.

MAINTENANCE

It is recommended that the hydraulic fluid be changed every 24 months. The tool should be returned to
Panduit Tool Solutions Division for proper oil changing.
Panduit Tool Solutions Division (USA)
1350 Lakeside Drive
Romeoville, IL 60446
Tel.: 888-506-5400, ext. 83255
CT-2980/L & CT-2980/LE_ENGL
CT-2980/L and CT-2980/LE ENGLISH
IMPORTANT INFORMATION
PA26011A01_02
o o
F/-5 C for any extended time, it is advisable to return
Panduit Europe • EMEA Service Center
Almelo, Netherlands
Tel.: + 31 546 580 451
Page: 5 of 58 3-2012