General Use & Safety Warnings; General; Before Operating; While Operating - VITO PRO-POWER VIRP100 Manual De Instrucciones

EN
2. GENERAL USE &
SAFETY WARNINGS
When using compressed air
tools, you should consider
certain basic safety measures to
avoid personal injury and equipment
damage.
Always read
operating and maintenance
instructions before you start using
the tools. Keep the instruction
manual for future reference.

2.1 - GENERAL

These preventive measures
essential for your safety, use the tool
always with care, in a responsible
manner and taking into account that the
user is responsible for any accidents
caused to third parties or their property.
The tool may only be used by who
have read the instruction manual and
are familiar with the handling. Before
using for the first time, the user must
be instructed by the vendor or other
competent person about the use of
the tool, should obtain appropriate and
practical instructions.
The instruction manual is an integral
part of the tool and must always be
provided.
Familiarize yourself with the accessories
/compressed air equipment connected
to the tool. The user must know how to
quickly stop the compressor or cut off
the compressed air supply to the tool;
Stay alert and use common sense while
working with a compressed air tool.
A moment of inattention may result in
serious injury.
Use the tool only if you are in good
physical and mental condition. Do
not use the tool if you are tired or
under the influence of alcohol, drugs
or medications. If you suffer from any
22
health problem, ask your doctor about
the possibility of working with the tool.
Never allow the use of compressed air
tools by children, persons with limited
physical, sensory or mental capabilities,
persons
knowledge of the equipment or other
persons who are not familiar with the
instructions for use.
Do not overload the tool, the equipment
the safety, works better and more safely within
the limits indicated in the technical
specifications.
Use the appropriate tool for each type
of work, the use of the tool for purposes
other than intended and improper use
of accessories may result in dangerous
are situations.
The tool can only be used as
described in this instruction
manual. No other use is permitted,
which may be dangerous and may
result in personal injury or damage to
the tool.
For safety reasons, any changes to the
tool other than assembly of accessories
authorized by the manufacturer are
prohibited. Any changes made void the
warranty.
You can obtain information about
authorized accessories from your VITO
official dealer.

2.2 - BEFORE OPERATING

Make sure that the tool is only used by
who is familiar with the user manual.
To ensure that you work with the
tool safely, you must take certain
precautions
consideration before operation, such
as:
� Check that the pressure of the
compressed air supply is in accordance
with the technical specifications of the
tool;
� Inspect the tool before each use. Make
lacking experience and
and procedures into
sure that the attached accessories
are properly assembled and in good
condition. If excessive wear or damage
occurs, replace the accessories.
� Check that all fastening screws are
tightened properly. A regular review
is important to ensure safety and
performance of the tool;
� Remove any wrench or adjustment
tool before switch on the tool. A wrench
attached to the rotating accessory may
result in injuries;
� After assembling the accessories
and before using the tool on a surface,
perform a full speed test with no-load
for some time. Check for misalignments
on moving parts or any other condition
that may affect tool operation. Make
sure all moving parts rotate smoothly
and without abnormal noise;
� Ensure that the "ON/OFF" switch
is not pressed while connecting the
tool to the compressed air system.
If the switch is damaged or does not
allow the operation of the tool to be
controlled, it must be repaired or
replaced in order to avoid unintentional
starting of the tool;
Carry out all necessary adjustments
and in case of questions or problems,
contact your official dealer.

2.3 - WHILE OPERATING

Keep other people away from
the workspace. Never use the
machine if animals
particularly children, are nearby.
Keep the workspace clean, organized
and well illuminated (brightness from
250 to 300 lux) in order to reduce the
risk of accidents.
Always wear clothing and personal
protective equipment. The use of visor
or goggles, dust mask, ear protection,
non-slip safety footwear, long-sleeved
clothing, gloves and helmet under
proper conditions, reduces the risk of
injury.
or people,