Switching Audio Mode; Sleep Timer - Emerson LC195EM87 Manual Del Usuario

W
ATCHING TV

Switching Audio Mode

This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.
TV
While receiving an MTS broadcast, press [AUDIO ]
repeatedly to cycle through the available audio channel.
MAIN : Outputs main-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
• The information display will automatically disappear
in a few seconds.
DTV
1
Press [AUDIO ] to display the currently selected
language and the number of available languages.
2
Press [AUDIO ] repeatedly to cycle through the
available audio languages.
• Available languages differ depending on the
broadcast. "OTHER" is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
• The information display will automatically disappear
in a few seconds.
Note:
• Pressing [AUDIO ] does not control external audio device.
14
EN
MAIN
SAP
MONO
25-03
A Day of Memories
KABC
75 TV-PG ENGLISH 1/2

Sleep Timer

The sleep timer can be set to automatically turn off the unit after an
incremental period of time.
1
Press [SLEEP ] to set the sleep timer.
• Sleep timer display appears on the TV screen.
2
Press [SLEEP ] repeatedly to change the amount of
time until shut off.
• You can set your unit to turn off after a set period of
time (from 30 to 120 minutes).
• Each press of [SLEEP
minutes.
• After set up, the sleep timer display can be called up
for checking by pressing [SLEEP
To Cancel the Sleep Timer
Press [SLEEP ] repeatedly until "SLEEP OFF" is
displayed on the TV screen.
Note:
• The sleep timer setting display will automatically disappear
in a few seconds.
• When you disconnect the unit from the AC outlet or when a
power failure occurs, the sleep timer setting will be canceled.
SLEEP OFF
SLEEP 120MIN.
] will increase the time by 30
].