Stenner M128 Serie Manual De Instalación Y Mantenimiento página 5

SAFETY INFORMATION
injury or property damage if ignored.
Chemical feed pump installation must always adhere to your local plumbing codes and
requirements. Be sure installation does not constitute a cross connection. Check local
plumbing codes for guidelines.
NOTICE: Indicates special instructions or general mandatory action.
NOTICE: This metering pump is portable and designed to be removable from the
plumbing system without damage to the connections.
Use the M128 only with a dry contact, reed switch style water meter.
DO NOT connect the M128 input signal cord to any AC voltage supply.
DO NOT connect the M128 input signal cord to any hall effect, 4-20mA or
voltage carrying signal source.
NOTICE: This metering pump and its components have been tested for use with the
following chemicals; Sodium Hypochlorite (10-15%), Muriatic Acid (20-22 Baume,
31.5% Hcl), and Soda Ash.
NOTE: Cette a pompe de dosage et ses composants ont été testés pour utilisation
avec les produits chimiques suivants; Hypochlorite de Sodium (solution de 10-15%);
Acide Muriatique (20-22 Baume, 31.5% Hcl); Cendre de Soude.
This is the safety alert symbol. When displayed in this manual or on the
equipment, look for one of the following signal words alerting you to the
potential for personal injury or property damage.
Electrical installation should adhere to all national and local codes. Consult a
licensed professional for assistance with proper electrical installation.
Suitable for indoor and outdoor use.
Convient pour usage intérieur et extérieur.
Pump uses a class 2 switching power supply.
Warns about hazards that WILL or CAN cause minor personal
PLUMBING:
US and Canada 800.683.2378, International 904.641.1666
continued
5