Resetting To The Factory Default Settings; Further Information - Axis P12 Serie Guia De Instalacion

AXIS P12 Series Installation Guide

Resetting to the Factory Default Settings

If the Axis product needs to be reset to factory default, follow these steps:
1. Disconnect power.
2. Press and hold the Control button and reconnect power.
3. Keep the Control button pressed for about 15 seconds until the Status indicator flashes amber.
4. Release the Control button. The process is complete after about 1 minute (when the Status
indicator turns green). The product has been reset to the factory default settings.

Further Information

The User Manual is available from the Axis Web site at www.axis.com
Tip!
Visit www.axis.com/techsup to check if there is updated firmware available for your network
camera. To see the currently installed firmware version, see Setup > About.
Learn more!
Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials
and guides.
Warranty
For information about Axis' product warranty and thereto related information, see
www.axis.com/warranty
Page 21