Installing The Glass Shades And Bulbs - HAMPTON BAY CAMPBELL 51350 Guía De Uso Y Mantenimiento

Assembly - Attaching the Lights
1
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
NOTE: Notice the location of the fan's slide switch. This is
the switch used to change the fan's directional rotation.
For more information on the operation of this switch, see
Operating Your Fan and Remote Control on page 12.
□
Remove the three screws (RR) on the switch cup cover of the
light kit fitter assembly (E).
□
Connect the wires from the light kit fitter assembly (E) to the
wires from the switch cup of the fan-motor assembly (D) by
connecting the molded adaptor plugs together (blue to black,
white to white). Carefully tuck all wires and splices into the
switch cup.
□
Align the three holes in the switch cup cover of the light kit
fitter assembly (E) with the three holes in the switch cup
of the fan-motor assembly (D). Make sure the notch in the
switch cup cover of the light kit fitter assembly (E) clears the
reversing switch in the switch cup of the fan-motor assembly
(D). Position the light kit fitter assembly (E) and re-install the
three screws (RR) that were removed in first step to secure
the light kit fitter assembly (E).
RR
2
D
E
11
Installing the glass shades
and bulbs
CAUTION: Make sure the power is off before attaching or
removing the glass shades.
WARNING: Allow the glass shades to cool completely before
removing.
NOTE: Using a E12 CFL type bulb will eliminate the dimming
option, and may cause flickering.
WARNING: Over lamping the fan will result in the fan lights
shutting down until the proper wattage of bulbs are installed.
Reset the lights by turning off, replace the bulbs with the
correct wattage bulbs, and turn on.
□
Insert the glass shade (H) into the glass holder by carefully
squeezing the steel tensioners on the light fixture socket
together.
□
Gently slide the glass shade (H) over the steel tensioners.
Make sure the glass shade (H) is fully inserted into the socket
for a secure fit. Repeat these instructions for the remaining
glass shades (H).
□
With the power off, install the light bulbs (Max. 60W, included)
(I) into the light bulb sockets.
Please contact 1-877-527-0313 for further assistance.
D
E
H
I
HAMPTONBAY.COM