Anti-Blocking Function (Abs); Cutting Function - UNITED OFFICE ULG 300 B1 Instrucciones De Uso

Anti-blocking function (ABS)

At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance .
♦ Turn the anti-blocking switch e to the position ABS . The pouch will no longer
be drawn in .
♦ Remove the pouch and turn the anti-blocking switch e back to the desired
pouch thickness .
♦ Re-start the lamination process .

Cutting function

If you want to use the cutting function on the pouch guide rail 1, take off the
pouch guide rail 1 .
♦ If necessary, fold in the document supports q .
♦ Attach the cutting attachment w so that it creates a flat surface with the
pouch guide rail 1 . To do this, place the pouch guide rail 1 on a table or
another flat surface .
♦ Push the cutting head 3 as far as the stop (the cutting head 3 can be
pushed to both ends of the cutting rail 2) .
♦ Flip up the cutting rail 2 up using the rounded handle and position the
documents on the pouch guide rail 1 . Fix the document in place by pushing
the pouch format guide 4 together until it is touching both sides of the
document .
♦ Use the markings on the scale table to align your document precisely .
♦ Flip the cutting rail 2 down so it clicks into place .
♦ Hold the paper firmly in place with one hand .
♦ To cut, press the cutting head 3 downwards with the other hand and push it
over the document in a single movement .
ULG 300 B1
GB │ IE │ 27 ■