Lamination Process; Anti-Blocking Function - UNITED OFFICE ULG 350 B1 Instrucciones De Uso E Indicaciones De Seguridad

Lamination process

♦ Place the pouch centrally on the small supporting surface at the pouch slot
If the size permits, the pouch should be placed with the closed side towards
the pouch slot
♦ Slide the pouch slowly and straightly into the pouch slot
♦ When you have slid the pouch several centimetres into the slot
be pulled in automatically . Release the laminating pouch as soon as you
notice it being pulled in automatically .
IMPORTANT
► Ensure there is at least 30 cm of open space in front of the laminator . Oth-
erwise, the pouch will not be ejected completely from the laminator after
lamination . This could damage the pouch .
♦ The finished and laminated pouch is ejected from the pouch ejector slot
of the laminator .
NOTICE
► Only after hot lamination: When the finished laminated pouch is
ejected from the pouch ejector slot
easily change its shape . For this reason, let the laminated pouch cool for
one minute before touching it .
► To improve the lamination result, you can weigh a still hot laminated pouch
down with a book, a file folder or any other heavy, flat object . This will
give it a smooth and flawless surface .
♦ If you do not wish to start another laminating procedure, move the On/Off
switch
position .
♦ Disconnect the plug from the mains power socket .

Anti-blocking function

At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance .
♦ Turn the anti-blocking switch
be drawn in .
♦ Remove the pouch and turn the anti-blocking switch
pouch thickness .
♦ Re-start the lamination process .
ULG 350 B1
.
1
to "OFF" and rotate the pouch thickness switch
5
4
of the laminator, it is hot and can
7
to the position ABS . The pouch will no longer
4
.
1
.
1
it will then
1
7
to the ABS
4
back to the desired
GB │ IE │ 9 ■