Filling With Water; Making Espresso; Getting Hot Water - SOLAC Taste Control Instrucciones De Uso

always can stop when desired. To do it, push
again over coffee button to stop and close the
steam knob (R) by turning clockwise
This will complete the priming operation.
•

FILLING WITH WATER

The tank must be filled with water before tur-
•
ning the appliance on.
Remove the water tank.
•
Fill the tank taking care to observe the MAX
•
level
Replace the tank in its housing, ensuring that
•
it is well fitted.
FILLING OF COFFEE
Remove the filter holder.
•
Position the ground chosen coffee filter (L ó M)
•
in the filter holder
We recommend using natural toast coffee, as
•
using roasted coffee may affect the operation
of the machine.
Fill the removable filter with ground coffee (6 to
•
7 gr per cup to be prepared).
If you wish to make 1 coffee, use 1 filter coffee,
•
fill the ladle (1 spoonful) and take the capaci-
ty of the measuring spoon as the measure for
one coffee.
For 2 coffees, use 2 cups filter (M), and put in
•
2 spoonfuls.
Next lightly press down the ground coffee with
•
the back of the spoon.
Fit the filter holder in the appliance once more.
•
Position the filter holder in the coffee assembly
•
by inserting the assembly from below to inser-
ting position and turning it from left to right until
it locks.
USE

MAKING ESPRESSO

Before connecting the machine, check that
•
steam control (R) is closed, turning clockwise.
Connect the appliance to the mains.
•
Turn the appliance ON pushing the on/off bu-
•
tton(F).
The indicators of 1 cup of coffee, 2 cup of co-
•
ffee and steam flash, the machine begins pre-
heating. After all indicators are solidly on. It
means right temperature is reached.
Place one or two pre-heated cups at the filter
•
holder outlet.
Press the coffee Button (G1 or G2). The coffee
•
infusion will begin to exit.
The coffee will stop automatically when rea-
•
ched the standard quantity.
TO CUSTOMIZE THE VOLUME OF COFFEE
Press and hold 1-cup button for 3 seconds,
•
1-cup button flashes, entering setting mode,
press 1-cup button again to start dispensing
coffee, when the specified time is reached,
press 1 cup button to complete setting which
can be memorized by the unit. You can do
same for 2 cups button.
Once serving has finished, wait a few seconds
•
and remove the cups with the coffee.
Remove the filter holder and empty the
•
grounds from it.
Wash the filter holder with running water and
•
dry it well.
Check that the removable filter is perfectly fit-
•
ted into the filter holder.
Fit the filter holder in the appliance once more.
•

GETTING HOT WATER

Put the device in ON situation, pressing the bu-
•
tton ON/OFF (F).
The indicators of 1 cup of coffee, 2 cup of co-
•
ffee and steam flash, the machine begins pre-
heating. After all indicators are solidly on, the
preheating is completed. This situation indica-
tes that the water has reached the right
Place a container under the nozzle.
•
Open the steam control (R), turning him to the
•
left, counterclockwise.
Press one of coffee outlet button (G1-G2).
•
EN