Installation - Klarstein Botella 166 Uno Manual Del Usuario

EN
32

INSTALLATION

Important: Before installation and usage read all the instructions and make sure that
the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the
same as the voltage and frequency in your home.
Electrical connection
• Your wine cooler is intended for fitted and permanent installation.
• This wine cooler is not designed to be used with an inverter-
• The cord should be secured behind the wine cooler and not left exposed or
dangling to prevent accidental injury.
• Never unplug the wine cooler by pulling the power cord. Always grip the plug
firmly and pull straight out from the receptacle.
• Do not use an extension cord with this appliance. If the power cord is too
short, have a qualified electrician or service technician install an outlet near the
appliance. Use of an extension cord can negatively affect the performance of the
unit.
• If any problems with the wine cooler persist, please contact the Customer Service
Dept.
Positioning
• It is advisable that your appliance is only installed in a location where the ambient
temperature of the room, corresponds with the climate classification that is stated on
the rating plate of your appliance. Your appliance may not function correctly if the
ambient temperature falls outside of the following ranges.
Climate classification
SN
N
ST
T
Appropriate ambient temperature
+10 to +32 degrees centigrade
+16 to +32 degrees centigrade
+18 to +38 degrees centigrade
+18 to +43 degrees centigrade