Operation With Detergent - Promaker PRO-H1400 User Manual

Connect the product to power and water supply as described.
• Open the water supply
• Hold the spray gun with both hands.
• Direct the nozzle of the chosen accessory away from you towards
the surface to be cleaned.
• Unlock the trigger and press it until a constant amount of water
flows through the nozzle, to allow air trapped in the hose to
escape.
• Release the trigger.
• Turn on the switch "OFF/ON".
• Hold the spray gun with both hands. Direct the water jet to the
object to be cleaned and press the trigger.
Release the lever of the trigger gun; the device will switch off again and
stop the water jet. High pressure remains in the system.
WARNING! Beware of kickback when pressing the trigger!

Operation with detergent

Detergent can only be added when the device is operated in low
pressure mode.
DANGER
When using detergents, the material data safety sheet issued by the
detergent manufacturer must be adhered, especially the instructions
16