Promaker PRO-H1400 User Manual página 15

• Turn on the appliance "OFF/ON"
• Unlock the lever of the trigger gun.
• Push the lever of the trigger gun, the device will switch on.
• Let the device run (max. 2 minutes) until the water exits the
trigger gun without bubbles.
• Release the lever of the trigger gun.
• Lock the lever of the trigger gun.
OPERATION
ATTENTION
Dry running of more than 2 minutes leads to damage of the high-
pressure pump. If the appliance does not build up pressure within 2
minutes, switch the appliance off and proceed in accordance with the
instructions in Chapter "Troubleshooting".
High pressure operation
CAUTION
Keep a distance of at least 30 cm when using the jet for cleaning
painted surfaces to avoid damage.
CAUTION
Make sure the on/off switch is set to "OFF/O" and insert the plug into a
properly installed socket.
ATTENTION
• The washer must be used on a secure and stable surface in a
standing, upright position.
15