Utilitech 7115-03 Manual De Usuario página 7

NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
4. Mount the fan housing (A) to the ceiling joist using
wood screws (4.1) (not included) where indicated.
5. Pull the house wires through the wire box cover hole.
Secure 120 V AC house wiring from the wall switch
to the fan as shown in the wiring diagram on page 5.
14 AWG is the smallest conductor that should be used
for branch-circuit wiring.
Carefully push the connected wires back into the
wiring box housing. Reattach the wiring box cover.
CAUTION: If the electrical wires do not match the
colors listed, you must determine what each house
wire represents before connecting. You may need to
consult an electrical contractor to determine safely.
6. Install a circular 4 in. duct (6.1) (not included) and
secure it with duct tape or clamps (neither included).
Finish ceiling work. The ceiling hole should be aligned
with the edge of the fan housing (A).
4
4.1
5
A
House
wires
6
4 in. duct
7
A
Ceiling Joist
4.1
Wire nut
(not included)
Product
wires
A
6.1
Duct tape
or clamp
Ceiling