Description Of Operation; Installation And Use; Checking The Packaging - Vitrifrigo CENTER COOLER Manual De Instalación

6 Description of Operation

The refrigerator operates using a refrigerant vapour compression cycle
that transfers heat from the inside to the outside, making it possible to
keep the liquid for human consumption stored inside it at a constant, pre-
set temperature.
The refrigerant evaporates by removing the heat from the air via the cold
inside walls of the refrigerator (in contact with the evaporator through
which it flows) before entering the compressor. Here the pressure and
temperature of the refrigerant are increased, and it is then passed
through an air-cooled condenser, where it is condensed. Lastly, the
refrigerant fluid returns inside the evaporator via capillary and the cycle is
repeated.
The internal temperature can be varied using the digital thermostat in the
frontal part of the refrigerator.

7 Installation and Use

7.1 Checking the packaging

As soon as the package arrives, inspect it, making sure that it is not
upturned and that it has suffered no damage during transport. Remove
the packaging and inspect the unit for damage of any kind.
If there is any doubt as to the integrity of the system parts, do not use the
refrigerator.
You must inform your dealer of any damage and/or anomalies not later
than 24 hours from the delivery date.
171209 – rev. 01 08/18 EN