Bolt Down Instructions - SentrySafe H060ES Manual Del Usuario

Bolt Down Instructions

To help provide maximum security, Sentry strongly recommends this safe be bolted down.
Select a suitable and convenient location for your safe. Set the safe in place and use the
holes provided in the bottom or back of the safe to mark the location of the holes to be
drilled in the floor or wall. It is not recommended to attempt to bolt to both floor and wall.
If bolting to a wall, please ensure that the safe is resting on a supporting surface, i.e. floor,
table or shelf.
Move the safe away and drill holes of the appropriate diameter and depth for the type of
hardware being used and the mounting surface (2 each — bolts, washers and masonry
anchors).
Place the safe back over the holes and install the fasteners as required.
NOTE: For maximum security on models which have feet, remove feet before bolting to floor.
11