Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Thank you for purchasing this
SentrySafe or ProStaff by SentrySafe
gun safe product.
Please read this manual before using this product.
We are pleased that you have chosen one of our gun safes to protect your firearms. You can be
assured that your safe meets the California Department of Justice standards for firearm safety.
This manual will provide you with the information you need to:
• unpack and set up your safe
• open the safe
• operate the lock
• take full advantage of your safe's special features.
Remember to keep your combination a secret. Writing down a combination and putting it in a desk
drawer is like leaving your door key under the mat - it invites entry.
Please retain this manual for your records. If you have any questions about your gun safe, please
visit our website at www.sentrysafe.com or call Sentry Customer Service at 1-800-828-1438 or
1-585-381-4900. Customer Service representatives are ready to assist you, 8 a.m. to 8 p.m., E.S.T.,
Monday - Friday.
Table of Contents
Unbolting your gun safe from the shipping pallet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Bolt-down instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Lock instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5
Lock instructions: For safes with 3-number combination lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Lock instructions: For safes with UL Group 2 combination lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Lock instructions: Standard electronic lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
Lock instructions: UL Type 1 electronic lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
SentrySafe or ProStaff Fire-Safe gun safes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
1-Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
French . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-12
Spanish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-18
Serial Number, Combination, Factory Code and Generic Code . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Unbolting your gun safe from the shipping pallet
WARNING!
This is a two-person operation and should not
be attempted without help. Before attempting
to unbolt your new safe, be certain someone is
with you to help steady the safe while you
work. Ensure the safe is standing upright on a
flat, level surface. (Fig. A)
NOTA: Sentry Group is not responsible for any
costs incurred for unit to be removed
from pallet and installed in place.
2
Brought to You by www.snapwhole.com
A
Tools/equipment required
• Adjustable wrench, pliers, or 17 mm (11/16") socket wrench
• Hammer
Instructions
1. Using a wrench or pliers, remove the nuts located under the X-cut in the carpet in the bottom of
the unit. (Fig. B)
NOTE: If the bolts turn when you begin to remove the nuts, reach between the
slats of the pallet and hold the bolts, by hand and/or with pliers, as you
turn the nuts.
2. Once the nuts are removed, use a hammer to tap the bolts through the bottom of the safe.
3. Close door and put handle in locked position.
4. With your helper, slide safe to one edge of pallet. Tip the safe so that the edge moves to the
floor. (Fig. C)
5. Remove the pallet and stand the safe upright on the floor.
B
Bolt-down instructions
To help provide maximum security, Sentry strongly recommends this safe be bolted down.
(Hardware supplied)
1. Select a suitable and convenient location for your safe. Set the safe in place and use the holes
provided in the bottom or back of the safe to mark the location of the holes to be drilled in the
floor or wall. It is not recommended to attempt to bolt to both floor and wall. If bolting to a
wall, please ensure that the safe is resting firmly on the floor.
Note: Fire-Safe models cannot be bolted to the wall.
2. Move the safe away and drill holes of the appropriate diameter and depth for the type of
hardware and the mounting surface being used (2 each - bolts, washers and masonry anchors).
3. Place the safe back over the holes and install the fasteners as required. If a water resistant unit
was purchased, rubberized washers are provided. Assure that the area around the safe hole
opening is clean using a damp cloth. Place the rubber side of the washer facing down against the
safe floor and install the fastener.
Water-resistant models must be bolted down. The supplied hardware
MUST BE USED to bolt the safe to the floor to ensure the watertight seal,
or the water-resistant claim is invalid. See "Water-resistance protection"
on page 6.
NOTE: Sentry Group is not responsible for any costs incurred if unit is to be replaced.
Lock instructions
The combination for this safe has been randomly selected and appears on the back cover of this
manual. It is important that you keep this Owner's Manual in a secure place other than IN your
safe; it is your reference for both the safe's combination and Serial Number. Compare the Serial
Number on the back cover with the number found on the lower right side of the safe. If the
numbers do not match, do not attempt to operate the combination and call Sentry
Customer Service at 1-800-828-1438 or 1-585-381-4900, 8:00 a.m. - 8:00 p.m. E.S.T.,
M-F.
C
Capítulos
Tabla de contenido
