Disinfection; Care And Maintenance; Recharge And Replacement Of Battery - KONTROLab EC-300 Manual De Usuario

8.2 Disinfection

To avoid permanent damage to the equipment, disinfection can be performed only when it
has been considered as necessary according to your hospital's regulations.
Before disinfection clean the equipment first. Then wipe the surface of the unit and patient
cable with 70% isopropyl alcohol. Wipe the surfaces of electrodes with 70% alcohol or
isopropyl alcohol. Never immerse the unit, cable or electrodes into disinfectant solution.
CAUTION : Do not use chloric disinfectant such as chloride and sodium

8.3 Care and Maintenance

8.3.1 Recharge and Replacement of Battery

1) Capacity Identification
Current capacity of the rechargeable battery can be identified according to the battery symbol
in the last row on LCD screen.
: Full capacity
: Not full but enough
: Capacity is limited, and recharge should be taken into account
: Battery is weak; and warning message "BATTERY WEAK" will be displayed on LCD
screen. The battery should be recharged immediately
2) Recharge
The electrocardiograph is equipped with recharge control circuit together with built-in
rechargeable lithium battery. Once the main unit is connected to mains supply with power
cord, the battery will be recharged automatically. And then the battery recharge indicator (
) and the mains supply indicator (
battery is full, the battery recharge indicator (
Because of the capacity consumption during storage and transport, the capacity of battery
is not full while being used at the first time. Battery recharge is recommended before first
usage.
hypochlorite etc.
) will be lit at the same time. When the capacity of
) will be black.
35