Manual Mode - KONTROLab EC-300 Manual De Usuario

3) Then press
PRINT/STOP
recorded now. It will stop automatically after a full 7-lead ECG printed out.
Pressing
PRINT/STOP
beginning record later, ECG will be recorded in order from the first lead again. And ID number
will increase one automatically. If the ID number needs not to be changed,
pressed to adjust it before recording.
Note: Recording mode can not be changed during the course of printing. Stop
recording before choose another recording mode.

5.6 Manual Mode

In the manual mode, users can determine the lead to be recorded and set the record settings
or other parameters according to different leads.
Operation Procedures:
1) Press
MODE
the left corner of LCD screen as MANU;
2) Press key (left arrow or right arrow key) to select the lead to be recorded;
LEAD
3) Press
MENU
key again to confirm the settings;
4) Then press
PRINT/STOP
calibration key can be pressed to print out 1mV pulse wave in the record while
5) 1mV
ECG recording;
6) Press
PRINT/STOP
Note: LEAD left and right arrow key can be pressed to switch the lead during the
course of recording.
key to begin recording. The symbol
again during the course of recording can stop printing. However, when
key to choose MANU mode, which can be discerned by the identifier on
key to set the record settings or other settings. After setting, press
key to begin recording;
key to stop printing after finishing ECG record.
28
means ECG is being
key should be
ID
MENU