Electrical Connection; Electrical Circuit Diagram - Standard Controller (Sc); Dip Switch - Pfannenberg DTT 6401 Serie Instrucciones De Servicio

GB
3.5

Electrical connection

3.5.1

Electrical circuit diagram - Standard controller (SC)

DANGER
Life-threatening danger due to electric shock
Live units and exposed connection cables can generate an electric shock and cause severe accidents.
 Work on electrical connections must be carried out exclusively by trained, qualified electricians.
 Ensure that the unit is voltage-free before routing all electrical connections.
2/
Max.2,5 mm
2/
AWG 14
Max.2,5 mm
AWG 14
Power cable
3x380V-420V 50Hz/ 3x440V-480V 60Hz
Item
Designation
Capacitor condenser fan
C11
(external)
F2-F5 Fuse
K20 Contactor compressor
M2 Condenser fan
S1.1 Door open
TK Door contact / signal (3,4)
Temperature sensor
TS2
(external)
X52 Heater condensate contact
Operating Manual DTT 6401 Standard Controller (SC) 086100036 © Pfannenberg GmbH
S1.2
S1.1
Item
C12
H1
LP1
(external) M3
S1.2
T1
X40/42
Designation
Capacitor evaporator fan
(internal)
LED / indicator unit
Controller
Evaporator fan (internal)
Door close
Control circuit transformer
Ground terminal contact
DIP-switch
085 000 447 11189-838b
Item Designation
F1 High-pressure pressostat
E1 Condensate evaporation
M1 Compressor
S1 Door contact
SK Fault signal contact (1,2)
Temperature
TS1
(internal)
Mains terminal contact
X50 + Door contact
+Fault indication
sensor
Page 25 / 42