Tabla de contenido
Apéndice B
DIAGRAMA DE CABLEADO: SUMINISTRO DE ENERGÍA DE INTERRUPCIÓN AUTOMÁTICA
A m i c o M i c r o p r o c e s s o r B a s e d A l a r m
USER RESPONSIBILITY
The information contained in this Installation and Operation Maintenance
Manual, pertains only to the ALERT-2 microprocessor based digital alarm.
This product will perform to conformity with the descriptions contained in this
manual, when assembled, operated, maintained and serviced in accordance
with the installation instructions provided.
The alarm must be checked periodically. Parts that are broken, missing,
worn, distorted or contaminated, must be replaced immediately. Should such
repair or replacement become necessary, please contact Amico Corporation
Cable de energía CC:
or their distributors.
Conecte al enchufe ubicado
en el Módulo LCD
All alarms should not be repaired, or altered without prior written or verbal
approval of Amico Corporation or it's distributors. Failure to comply will void
all warranty on the alarm.
Statements in this manual preceded by the words
NOTE
DANGER and
carefully.
PRECAUCIÓN:
1.
Verifique que la fuente de energía ha sido desconectada antes de trabajar en la alarma.
WARNING:
2.
Riesgo de descarga eléctrica, desconecte la energía en el interruptor de circuito, antes de retirar el
protector del suministro de energía.
20
Amico Corporation
Suministro de
AC Supply
energía CA:
115 to 220 VAC
115 a 220 V CA
ON/OFF
Interruptor de
Toggle Switch
palanca acodada
DC Power Cable:
Connect to
Annunciator Module
are of special significance. Please read these sections
denotes steps which can prevent injury.
G
N
L
WARNING
L - Viva
L - Live
N - Neutral
N - Neutra
G - Ground
G - Tierra
Tierra
Ground
Fusible (1 AMPw)
Fuse (1 AMPw)
CAUTION
,
,
Tabla de contenido
