Assembly, Connection And Use - Parkside PGD 1 A1 Instrucciones De Uso

Assembly, connection and use

NOTE
♦ The surface must be flat. The product must
be stable and must not tip over.
♦ Push the ground rod into the lawn (see fig. A).
♦ Insert the riser into the ground rod and tighten
the union nut clockwise by hand (see Fig. B).
♦ Turn the water flow regulator clockwise, i.e.,
in the direction of the narrow end of the sym-
bol , as far as it will go so that the water
flow is closed (see fig. C).
♦ Connect a suitable garden hose to the
13 mm (½") hose connector of the product
(see Fig. D).
♦ Open the water tap so that the garden hose
fills with water (see Fig. E).
PGD 1 A1
GB │ IE │
5 ■