1_SMO-210TP_ENG
5/30/03
Chapter 7: Alarm, Motion, Loss and Door Bell
1. Alarm Occurrence
e-42
2:56 PM
Page e-42
The Alarm becomes available only when an Alarm Box is connected.
1) When an Alarm trigger is received, a warning buzzer sounds and the screen is divided
into 9 Live-Mode sub-screens. The word "EVENT" appears on the screen and the Alarm
occurrence information is displayed at the right bottom of the screen.
02/06/01
12:30:01
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
A 12345678
2) Press ENTER (in the middle of the Rotary Wheel) to replay the event in Event Replay
mode. Up to 15 screens can be replayed centering on the time of the Alarm. The duration
of Replay is displayed in a graph.
Turn the Rotary Wheel during the Replay to forward or reverse the stored screens one by
one.
Press ENTER to terminate the Event Replay. The Event Replay will continue until
ENTER has been pressed.
02/06/01
12:30:01
1
CH1
CH2
CH3
CH4
CH5
CH6
ALARM
02/06/01
12:29:30
CH7
CH8
3) Alarm occurrence information is stored in the "EVENT LIST".
4) Alarm Out (HOT, COLD) signals are active during the "ALARM HOLD TIME. "
•
ALARM HOLD TIME : Time during which the Alarm function is carried on after the
Alarm is first detected. Alarm Hold Time is reset automatically when Event Replay is
turned on.
EVENT
EVENT