Federal Signal Spire 200 Instrucciones De Instalación Y Mantenimiento página 6

Installation and Maintenance Instructions
warning light installed. The light could fly off the vehicle,
causing injury or damage. Repair of damage incurred
because of ignoring this warning shall be the sole
responsibility of the user.
• Locate the light system controls so the VEHICLE and
CONTROLS can be operated safely under all driving
conditions.
• After installation, test the light system to ensure that it is
operating properly.
• Test all vehicle functions, including horn operation, vehicle
safety functions, and vehicle light systems to ensure proper
operation. Ensure that the installation has not affected the
vehicle operation or changed any vehicle safety function or
circuit.
• Scratched or dull reflectors or lenses will reduce the
effectiveness of the lighting system. Avoid heavy pressure
and the use of caustic or petroleum-based products when
cleaning the lighting system.
• Replace any optical components that may have been
scratched or crazed during system installation.
• Do not attempt to activate or deactivate the light system
controls while driving in a hazardous situation.
• You should frequently inspect the light system to ensure that
it is operating properly and that it is securely attached to the
vehicle.
• After installation and testing are complete, provide a copy
of these instructions to instructional staff and all operating
personnel.
• File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the product. Failure to follow
all safety precautions and instructions may result in property
damage, serious injury, or death.
6
Spire
Federal Signal www.fedsig.com
200 Beacon
™