Updating Firmware - DJI SPARK Guía De Usuario

LED Display When Working Improperly
LED1 LED2 LED3
You do not need to unplug and plug in the charger in the event of temperature error;
the charger will resume charging when the temperature is within the allowable range.

Updating Firmware

DJI will release firmware updates periodically. Refer to the official DJI website and
follow the instructions below to update the firmware.
1. Download the latest firmware updating program from the official DJI website.
(http://www.dji.com/spark/info#downloads)
2. Connect the station to a computer using a Micro USB cable.
3. Press the power button once, then again, and hold to turn on the station, or
connect it to a power source if its power level is too low (less than 5%).
4. Run the firmware update program. Press the update button and wait for the
process to finish.
5. The Charging Station will automatically restart when the update has been
successfully completed.
6. Repeat this process if, for any reason, the firmware update fails.
LED4 Blinking Pattern
LED4 blinks twice per
second
LED4 blinks three times
per second
Battery Protection Item
The station temperature
is too low
The station temperature
is too high
9