Updating The Firmware - DJI WCH2 Guía De Usuario

Status LED Descriptions
Status LED
Blinks Green
Solid Green
—
Blinks Red
Solid Red
—
Blinks Yellow
Solid Yellow
—
Alternating
Green Blinks

Updating the Firmware

DJI will release firmware updates when available. Refer to the
official DJI website and follow the instructions below to update the
firmware.
1. Download the latest firmware update program from the official
DJI website.
(http://www.dji.com/crystalsky/info#downloads)
2. Turn on the Charging Hub, then connect it to a computer using
a Micro USB cable.
3. Run the firmware update program. Press the update button and
wait for the process to finish.
4. The Charging Hub will automatically restart when the update
has been successfully completed.
5. Repeat this process if the firmware update fails for any reason.
Description
Charging
Fully charged
Battery Charger Error. Retry with
an official battery charger.
Battery error
Battery temperature too high/
low. Temperature must be within
operating range (5°-40℃)
Ready to charge
Intelligent Battery not detected
5