DJI SPARK Guía De Usuario página 6

1. Connecting to a Power Source
Connect the Spark Battery Charger to a power outlet (100–240 V, 50–60 Hz), then
connect the Charging Station to the Spark Battery Charger.
2. Connecting the Batteries
1
2
Toggle the Securing Board Switch to open the board
and then align the battery with the Battery Slot Track
and insert the battery as shown below. Push the
battery in the direction of arrow
place.
Align the external charging contact on the aircraft's
battery with the Charging Station's contact, and
then insert the aircraft into the station. After charging
starts, the aircraft will power off.
Close the securing board and ensure the board
is fastened when hearing a "click" and seeing the
switch return to its original position.
to secure it in
2
5