Conversion Of The Valve Zone - Aventics AV03/05 mit IO-Link Descripción De Sistema

17
Fig. 8: Example of rating plate with address table
17 Address table number (see "13.2 Address tables" on page 69)
Table 11: Example address table (address table 7)
Valve position 14 coil
1 Coil 1 (X.0)
2 Coil 3 (X.2)
3 Coil 5 (X.4)
4 Coil 7 (X.6)
5 Coil 9 (X+1.0)
6 Coil 11 (X+1.2)
7 Coil 13 (X+1.4)
8 Coil 15 (X+1.6)
9 Coil 17 (X+2.0)
10 Coil 19 (X+2.2)
11 Coil 21 (X+2.4)
12 Coil 23 (X+2.6)
13 Coil 24 (X+2.7)

10.4 Conversion of the valve zone

The symbols for the valve zone components are explained in "10.2 Valve zone" on page 59.
Impermissible, non-compliant expansion!
Any expansions or reductions not described in these instructions interfere with the basic
configuration settings. This will prevent a reliable system configuration.
Observe the rules for the expansion of the valve zone.
Observe the specifications of the system owner as well as any restrictions resulting from the
overall system.
You may use the following components for the expansion or conversion of the system:
Multipole board with the corresponding base plates
Bridge cards with pneumatic supply plates
AVENTICS | AV03/05 with IO-Link | R412018145–BAL–001–AC
Address-Data: 7
12 coil
Coil 2 (X.1)
Coil 4 (X.3)
Coil 6 (X.5)
Coil 8 (X.7)
Coil 10 (X+1.1)
Coil 12 (X+1.3)
Coil 14 (X+1.5)
Coil 16 (X+1.7)
Coil 18 (X+2.1)
Coil 20 (X+2.3)
Coil 22 (X+2.5)
-
-
NOTICE
63
Conversion of the Valve System