Leds; Baud Rate - Aventics AV03/05 mit IO-Link Descripción De Sistema

IO-Link connection
2 1
3 5 4
X7I1
Fieldbus cable
4
The IO-Link connection X7I1 (3) is a male, 5-pin, A-coded M12 plug.
See Table 6 for the pin assignments for the IO-Link connection. The view shown displays the
device connections.
Table 6: Pin assignments for the IO-Link connection X7I1
Pin
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Danger caused by incorrectly assembled or damaged cables!
The IO-Link interface may be damaged.
Only use tested cables.
Only use standard sensors/actuator cables in accordance with IEC 61076-2.
4.1.2

LEDs

The IO-Link interface features an LED.
The table below describes the functions of the LED. For a comprehensive description of the LEDs,
see "9 LED Diagnosis on the IO-Link Interface" on page 57.
Table 7: Meaning of the LEDs in normal mode
Designation Function
DIAG (4) Load supply and display of the communication
status
4.1.3

Baud rate

The IO-Link interface is fixed to 38.4 kBaud (COM2). The IO-Link master automatically syncs to this
Baud rate. Adjustments to the IO-Link interface are not possible.
AVENTICS | AV03/05 with IO-Link | R412018145–BAL–001–AC
M12 plug, male, 5-pin, A-coded
L+
Type A: n.c./type B: UA + 24 V
L-
CQ (IO-Link data)
Type A: n.f./type B: UA 0 V
NOTICE
51
About This Product
State in normal mode
Illuminated green