Technical Data; Noise And Vibration Data; Vibration Information - Worx WX445 Manual Original

TECHNICAL DATA

Type wx445 wx445.1( 4-designation of machinery, representative of saw)
Rated voltage
Rated power
Rated no load speed
Max. cutting capacity
Bevel capacity
Blade size
Protection class
Weight

NOISE AND VIBRATION DATA

A weighted sound pressure L
K
PA
A weighted sound power L
K
WA
Wear ear protection when sound pressure is over

VIBRATION INfORmATION

Vibration total values (triax vector sum) determined according to EN 60745
Typical weighted vibration
wARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
Circular saw with laser
wx445
90° 66mm
45° 47mm
190mm
PA
WA
220-240V ~50/60Hz
1600W
5000/min
0-51°
/II
4.3kg
Vibration emission value a
Uncertainty K=1.5m/s
wx445.1
64mm
45mm
185mm
L : 92.4dB(A)
pA
3dB(A)
L : 103.4dB(A)
wA
3dB(A)
80dB(A)
= 4.37m/s
2
h
2
EN
7