Cardin TXQ449100 Datos Técnicos, Dibujos Técnicos De Instalación Y Referencias página 21

locations and the overall capacity of the SIM Telephone card's address book, for three seconds.
• NEW: starts up the memorisation procedure for a new number in the address book that will be auto-
matically added by direct dialling the receiver from the appliance you wish to enable.
Memorisation is only possible if memory locations in the address book are still available. Press
to activate the procedure which can be interrupted at any moment by pressing the
operations required to memorise a new number are:
1. Start up the process by pressing
2. Dial the receiver using the appliance you wish to memorise; as soon as the number is identified the
call will be terminated. If the number is already stored in memory an error message will appear for a
few seconds, after which the procedure will be restarted from the beginning.
3. The entire number is shown on the display. Press
functions to be associated with the number or press
4. Using the
letters "A/B/C/D" identify the receiver channel, while the letter "R" (Remote) means the number can
only be used for remote access. Press
procedure.
5. To complete the procedure and save the number in the address book one more confirmation must
be given by pressing the
6. The number will be saved in the address book in the next available memory location and will be
confirmed by 'MEMORISED' appearing on the display. After two seconds has elapsed 'NEW' will
once again appear on the display
• REMOVE: allows you to display and if needed cancel telephone numbers from the SIM address book.
Press to activate the procedure which can be interrupted at any moment by pressing the
ENT
The operations required to cancel a number are:
1. Start the procedure by pressing
2. The first memorised number is looked up in the address book, starting in order from the first memory
location and then shown on the display. This operation can take a certain amount of time depending
on the size and occupation of the database. If you press
and you will be returned to the 'REMOVE' menu. If the address book is empty the acronym 'EMPTY'
will be shown on the display and you will be returned to the 'REMOVE' menu automatically.
3. The identification number is shown on the display while waiting for the user to make a choice. Using
the buttons you carry on the search from point 2, pressing
cancelled. Press
ESC
4. To complete the procedure and cancel the number one more confirmation must be given by pressing
the button. Cancellation will be confirmed by the message "ELIMINATO!" appearing on the display
for two seconds after which will be taken by to point 2.
MENU: PIN SIM
This menu allows you to memorise the PIN of the telephone SIM into the user code memory so that the
receiver can use it whenever it is requested by the SIM. If the PIN is absent the modem cannot be started up.
To modify the value go to the PIN SIM menu and select
given the value '0' as a starting point. Using the
the number until the desired value appears on the display. Keeping the button pressed down will force it
ENT
buttons scroll through the functions that can be associated with the number. The
ENT
button. Press
.
ENT
to cancel the procedure and return to the menu "REMOVE"
, 'CALL' will appear on the display.
to accept the number and then select the
ENT
to terminate the procedure.
ESC
to accept the setting or press
to cancel the procedure.
ESC
the search function will be interrupted
ESC
. The current PIN is not visible and you will
ENT
(increasing/decreasing in steps of 1 unit) modify
21
ESC
to terminate the
ESC
will select the number to be
ENT
ENT
key. The
key.
ESC