Indefi Nite Time Cycle With Cabinet Set Point Setting; Conservation Phase; Memorising A Blast Chill/Shock Freeze Programme; Recall Of Memorised Blast Chill/Shock Freeze Programme - TRAPEZA 7NU0309CG54 Manual Uso Y Mantenimiento

7.3.6. INDEFINITE TIME CYCLE WITH CABINET SET POINT SETTING
Press the
cate the letters PO and the clock symbol
Select a blast chill or shock freeze programme with the appropriate buttons +3°C soft
(Fig.13)
soft
it, the type of blast chill
DISPLAY 2 indicates the default temperature of the selected cycle for blast chill (Fig.14).
(Fig.14)
By rotating the
To start or stop the machine press the

7.3.7. CONSERVATION PHASE

The machine proceeds to conservation phase when the last pin probe has reached core temperature
at the end of the cycle. DISPLAY 2 indicates the cabinet temperature (Fig.15).
The conservation symbol
(Fig.15)
By rotating the
This phase is terminated by pressing the
The machine sets itself on Stand-by and the user is asked whether the programme is to be memo-
rised or the button must be pressed once more. Press the pin probe heating button
extraction of the probe from the product (after shock freezing).
The
Pin probe heating takes place only if the temperature of the probe is less than -5ºC

7.3.8. MEMORISING A BLAST CHILL/SHOCK FREEZE PROGRAMME.

Press the
of the fi rst free programme. When the
trol positions itself to re-start with a new cycle (Fig.16).
It is possible to cancel a memorised programme by overwriting it with a new blast chill/shock freeze
(Fig.16)
cycle as follows: instead of memorising a completed cycle on the fi rst free programme automatically
selected by the system, rotating the
cancelled and press the programme button
If symbols
memorised programmes.
(Fig.17)

7.3.9. RECALL OF MEMORISED BLAST CHILL/SHOCK FREEZE PROGRAMME

To select a blast chill/shock freeze programme press button
memorised programmes are displayed in sequence (Fig.18). Press button
(Fig.18)
selected blast chill/shock freeze programme. If DISPLAY 2 (Fig.17) indicates symbols
there are no memorised programmes.
button to exit any programme. Press the button once again and DISPLAY 1 will indi-
. DISPLAY 1 indicates the infi nity symbol
or shock freeze
to increase or decrease the set temperature value shown in DISPLAY 2.
light up.
to view the time elapsed from the beginning of the conservation phase.
symbol lights up on the display.
button when the machine is in conservation mode. DISPLAY 1 indicates the number
appear on DISPLAY 2 (Fig.17) next to the number, it means that there are no
(Fig.13).
with the clock symbol
, the temperature symbol
button.
, button.
, button is pressed, the cycle is memorised and the con-
position it on the number of the programme to be
.
, by rotating the
27 - GB
or –18°C
, next to
and .
to facilitate
.
the
, to commence the