Idiomas disponibles

Idiomas disponibles

IB520027ML
697916
LDRT2 LED Retrofit
Boîtier de postcâblage pour luminaire à DEL, modèles LDRT2
Lámpara retrofit LDRT2 LED
IMPORTANT: Read carefully before installing fixture. Retain
for future reference.
WARNING
Risk of Electrical Shock! Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Fire! Do not install insulation within 3 inches
(76 mm) of any part of the luminaire fixture or in a
way that may entrap heat.
WARNING
Installation and servicing to be performed only
by qualified personnel. If not qualified, consult an
electrician.
WARNING
Do not energize the LED Engine until the protective
packaging has been removed and the lower trim
properly installed. Do not touch the yellow surface of
the LED as it may damage the light engine.
N
otee:
This fixture should be supported by main runners or
other structure that is capable of supporting fixture
weight of 30 Ibs.
SAFETY: When using electrical equipment, basic safety
precautions should always be followed, including the
following:
1.
This unit is for recessed mounting only. Do not use in
hazardous locations nor near gas or electric heaters.
2.
Do not use this equipment for other than the intended
use.
3.
Install only in accordance with National Electrical Code
and local regulatory agencies' requirements.
Brand Logo
reversed out of
black
TM
INS #
INS #
INS #
Tabla de contenido
loading

Resumen de contenidos para Eaton Portfolio LDRT2

  • Página 9 Al finalizar, cierre la puerta de la caja de derivación (consulte la figura 1). Conecte la desconexión rápida en el conector de Inserte cuidadosamente la caja de derivación en el desconexión rápida orificio del techo. Figura 2 Instrucciones de instalación - Lámpara retrofit LDRT2 LED www.eaton.com...
  • Página 10 Apriete a mano hasta que quede bien sujetado El ángulo de la Figura 4 lente de lavado de pared coincide con el ángulo de la óptica Dirección de salida de luz Figura 7 Instrucciones de instalación - Lámpara retrofit LDRT2 LED www.eaton.com...
  • Página 11: Conexión Eléctrica

    Coloque todas las conexiones y el cableado excedentes en la caja de empalmes, y vuelva a colocar la cubierta. Coloque todos los cables y conexiones excedentes en la caja de derivación y vuelva a colocar la cubierta. Instrucciones de instalación - Lámpara retrofit LDRT2 LED www.eaton.com...
  • Página 12: Diagramas De Cableado

    Las luminarias Portfolio de las series LD2B*D010 se pueden regular con muchos controles reguladores de 0-10 VCC estándar. Para asegurarse de que cuenta con información actualizada sobre la compatibilidad entre luminarias y reguladores, remítase al sitio web de las luminarias LED Portfolio: www.portfolio-lighting.com. Instrucciones de instalación - Lámpara retrofit LDRT2 LED www.eaton.com...
  • Página 13: Garantías Y Limitación De Responsabilidad

    Warranties and Limitation of Liability Please refer to www.eaton.com/WarrantyTerms for our terms and conditions. Garanties et limitation de responsabilité Veuillez consulter le site www.eaton.com/WarrantyTerms pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.eaton.com/WarrantyTerms para conocer nuestros términos y condiciones.

Tabla de contenido