Sammic DS-12 Instrucciones página 15

fig. 12
1) press so that it starts to blink
2) move it with the
3) press to confirm.
SELECTING THE REGENERATION TIME
To the left of the screen, a triangle points to the phrase "regeneration time" (regen time)
1) press so that the screen starts to blink
2) with the buttons select the time you want for the regeneration (fig. 13)
3) press to confirm.
SELECTING THE REGENERATION DATE
The screen will display a number that indicates how often the regeneration will take place and a
small triangle under the word DAYS (fig. 14).
1) Press so that the screen starts to blink
2) Press the buttons to select how many days must elapse between one regeneration and
another.
The values range from 0.5 to 99.
The value 0.5 indicates that there will be two regenerations per day with a gap of 12 hours.
For example: if in "regen time" (consult 9.4) you select 17, the regeneration will take place at 5
o'clock.
The other values range from 1 (one regeneration a day) to 99 (a regeneration every 99
days). Press to confirm.
If you want to select the exact days of the week on which the regeneration must take place, select
the value 0 with the
fig. 15
1) Press . The screen will display the value 0 and a triangle on the left will point to the phrase
"Regen Time & Day".
2) Press . Another triangle will blink at the top of the screen, under SU (Sunday).
3) Press . The triangle will move to the next day without blinking.
buttons until the current date is shown (fig. 12)
fig. 13
fig. 14
buttons and follow these instructions:
15
EN