Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TECHNICAL CHARACTERISTICS
Dimensions (fig. 5):
A - Width [mm]:
B - Depth [mm]:
C - Height [mm]:
Weight [Kg]:
Regeneration salt [Kg]
Salt in brine [Kg]
3
Cyclic capacity [m
°f]
Power supply: 230 V 50/60 Hz standard / 120 V 60 Hz optional
Supply water pressure: min. 2 bar, max. 8 bar
Maximum flow-rate: 1500 l/h
Ambient temperature: 4°-30°C
Absorbed power: 4 W
Water inlet connections (fig. 2): 1/2"G; 3/4"G with mixer; 1"G with mixer;
CHARACTERISTICS OF THE SUPPLY WATER
•
Potable water
•
Min. temperature 4°C – max. 25°C
•
Clean water (SDI 1)
•
Maximum hardness 90°f
VOLUME OF SOFT WATER D EPENDING ON ITS HARDNESS
In the following table the litres of soft water depending on its hardness are shown.
° f
MODEL
° d
ppm CaCO3 200
DS-12
DS-26
SAFETY PRECAUTIONS
Please read the following information carefully before proceeding to install the machine:
1.
The installation and maintenance will be carried out exclusively by qualified staff with
experience with this type of machines and who have perfect knowledge of the safety regulations in
force at the location of the installation;
2.
Before installing, make sure that the machine does not present any anomalies or damage
caused during transport. Otherwise please contact the distributor.
3.
The water softener only guarantees the descaling of cold potable water. Any other use is
considered as improper.
4.
All repairs and maintenance will be carried out with original spare parts;
5.
Do not expose the machine to rain or humidity;
6.
Do not touch the water softener with wet, damp or unprotected hands or feet;
7.
Before carrying out the electrical connection, make sure that the available power line voltage
coincides with the voltage indicated on the label attached to the machine;
12
EN
DS-12
320
500
660
16
1,5
30
50
WATER HARDNESS
20
30
40
50
11
16
22
28
300
400
500
2520 1680 1260 1008 840
5040 3360 2520 2016 1680
DS-26
320
500
1120
32
3
50
101
60
33
600
Tabla de contenido
