Beyond Navigation
................................................................................................................................................................................................................
of Jpeg or Tiff file. After the shift, PC Utility will automatically match
the photo and track waypoints again. Users can put more than 365 in
days.
9. <Photo> \ <Write GPS Info into Photos>
will save the latitude, longitude, and altitude information into photo.
A progress window will show the writing progress.
H. Navigate as a Bluetooth GPS Receiver with
handheld device
H‐1 Activate the Bluetooth function in your PDA/Smart phone or
PC
Before activating the Bluetooth function in your PDA/PC, please
power on BT‐Q1300 to pair and check if your device is equipped with
Bluetooth function. If not, you may need to acquire an optional
CF/SD Bluetooth card or Bluetooth dongle. (The pass code is "0000")
H‐2 Automatically create a shortcut in Bluetooth Manager
window
After the pairing complete, the system will then find a quick connect
device "Qstarz GPS" in Bluetooth Manager. In further use, you just
need to click it to connect to this Bluetooth GPS Receiver.
H‐3 Check the Serial Port in Bluetooth Setting
After complete pairing with BT‐Q1300, please click "Serial Port" to
confirm the assigned COM port. If you use PDA/PC to pair the GPS
Receiver, please check "Outbound COM port".
H‐4 Set correct Serial Port in your map software
Activate your navigation software and make sure to select the
correct "Serial Port".
NOTE 1: In the map software such as TomTom, you might need to
change preference and set "Other Bluetooth GPS" according
to PDA/phone model. In some case please consult map
software company to vary the setting if you have issue on
................................................................................................................................................................................................................
www.Qstarz .com
English
7