2.2.2 Recharge the batteries through the USB cable
When the Digital Pocket Memo is connected to a PC or notebook computer with the supplied
USB cable, the rechargeable batteries of the device are automatically recharged. If the USB port
on the computer is high powered, a complete recharge cycle takes about 2.5 hours. You can keep
using the Digital Pocket Memo while it is being recharged.
Important: If the USB port of the computer does not support the high power standard
C
(500 mA), disable ‚USB quick charge' in the menu of the Digital Pocket Memo and recharge
the batteries using the power supply.
2.2.3 Recharge the batteries through the docking station
When the Digital Pocket Memo is connected to the docking station, the device is powered
by the docking station and not by the batteries. If the Digital Pocket Memo is operated with
rechargeable batteries, the batteries are automatically recharged while the Digital Pocket Memo
is connected to the docking station.
Important: The Digital Pocket Memo may become warm during fast recharging.
C
2.3
Activate the Digital Pocket Memo
The Digital Pocket Memo is turned on and off by sliding the
the first time, you will be prompted to set the language, date and time.
2.3.1 Set the language
When using for the first time, you will be prompted to set the language.
Press the
+
and
-
1
Press the
OK
smart button (2a) to confirm your selection. The selected language will be
2
displayed.
D Note: It is also possible to change the language later using the menu. See
menu
on page 13 for more information.
Quick reference guide
buttons (5) on the Digital Pocket Memo to select a language.
ON/OFF
switch (13). When using for
Digital Pocket Memo