Oven Vent; Sabbath Mode; Baking And Roasting - Whirlpool W11256524A Instrucciones Para El Usuario

Oven Vent

A. Oven vent
The oven vent releases hot air and moisture from the oven
and should not be blocked or covered. Blocking or covering the
oven vent will cause poor air circulation, affecting cooking and
cleaning results. Do not set plastics, paper, or other items that
could melt or burn near the oven vent.

Sabbath Mode

The Sabbath Mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath Mode is set, only the Bake cycle will operate.
All other cooking and cleaning cycles are disabled. No tones will
sound,and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will
not turn on or off and the heating elements will not turn on
or off immediately.
To Enable Sabbath Mode Capability (One Time Only):
1. Press SETTINGS/CLOCK until "SABBATH" is displayed.
"OFF. Press (1) for On" will scroll in the display.
2. Press the "1" keypad. "ON. Press (1) for Off" will scroll in the
display. Sabbath Mode can be activated for baking.
3. Press START or CANCEL to exit and display the time of day.
NOTE: To disable Sabbath Mode, repeat steps 1 through 3 to
change the status from "SABBATH ON" to "SABBATH OFF."
To Activate Sabbath Mode:
1. Press BAKE.
2. Press the number keypad to set a temperature other
than 350°F (177°C).
3. Press START.
For timed cooking in Sabbath Mode, press COOK TIME
and then the number keypads to set the desired cook time.
Press START.
4. Press SETTINGS/CLOCK. Three tones will sound. Then
press "7." "SAb" will appear in the display.
To Adjust Temperature (When Sabbath Mode is Running):
1. Press the number keypad as instructed by the scrolling text
to select the new temperature.
NOTE: The temperature adjustment will not appear on
the display, and no tones will sound. The scrolling text
will be shown on the display as it was before the keypad
was pressed.
2. Press START.
To Deactivate Sabbath Mode:
Press SETTINGS/CLOCK, and then press "7" to return to regular
baking, or press CANCEL to turn off the range.
A

Baking and Roasting

Preheating
When beginning a Bake, Convect Bake, or Convect Roast cycle,
the oven will begin preheating after Start is pressed. The oven
will take approximately 12 to 15 minutes to reach 350°F (177°C)
with all of the oven racks provided with your oven inside the
oven cavity. Higher temperatures will take longer to preheat. The
preheat cycle rapidly increases the oven temperature. The actual
oven temperature will go above your set temperature to offset
the heat lost when your oven door is opened to insert food. This
ensures that when you place your food in the oven, the oven
will begin at the proper temperature. Insert your food when the
preheat tone sounds. Do not open the door during preheat before
the tone sounds.
Rapid Preheat
Rapid Preheat can be used to shorten the preheating time. Only
one standard flat oven rack should be in the oven during Rapid
Preheat. Extra racks should be removed prior to starting Rapid
Preheat. Press RAPID PREHEAT, and follow the oven control
prompts, or, if preheating has already started, simply press
RAPID PREHEAT. The preheating cycle should be completed
before placing food in the oven. When the Rapid Preheat cycle
is complete, the oven starts a normal Bake cycle.
IMPORTANT: Rapid Preheat should be used only for
one-rack baking.
Oven Temperature
While in use, the oven elements will cycle on and off as needed
to maintain a consistent temperature, but they may run slightly
hot or cool at any point in time due to this cycling. Opening the
oven door while in use will release the hot air and cool the oven
which could impact the cooking time and performance. It is
recommended to use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run in
the non-convection Bake mode to improve oven performance.
ACCUBAKE Temperature Management System
®
The ACCUBAKE system electronically regulates the oven heat
®
levels during Preheat and Bake to maintain a precise temperature
range for optimal cooking results. The bake and broil elements
or burners cycle on and off in intervals. On convection range
models, the fan will run while preheating and may be cycled on
and off for short intervals during Bake to provide the best results.
This feature is automatically activated when the oven is in use.
Before baking and roasting, position racks according to
"Positioning Racks and Bakeware" section. When roasting, it is
not necessary to wait for the Oven Preheat cycle to end before
putting food in, unless it is recommended in the recipe.
Frozen Bake™ Technology
Frozen Bake™ Technology can be used to cook prepackaged
frozen food without needing to preheat the oven and without
overbrowning the food. There are 4 preprogrammed food options
to choose from: Pizza, Lasagna, Nuggets/Fries, and Pie. Frozen
Bake™ Technology should only be used for these foods. Cook
only 1 package at a time when using Frozen Bake™ Technology.
Use the recommended temperature and maximum recommended
time from the packaging.
A beep will alert you to check the food's doneness before the
cook time is completed and again at the end of the cook time.
The display will prompt you to add to the cook time or end
the cycle.
13