Electronic Oven Controls - Whirlpool YWFE975H0HV Manual De Instrucciones

KEYPAD FEATURE
COOK TIME Timed coking
PROOF Proofing
bread
RAPID PREHEAT Rapid oven
preheating
AQUALIFT SELF Clean cycle
CLEAN
REMOTE ENABLE Enable remote
app control
CONNECT Connect to
Wi-Fi
AquaLift ® Self-Cleaning Technology
®
AquaLift Self-Cleaning Technology is a first-of-its-kind cleaning
solution designed to minimize the time, temperature and odors
that ordinarily come with traditional self-cleaning methods. With
®
AquaLift Self-Cleaning Technology, an exclusive coating on the
interior of the oven is activated with heat and water to release
baked-on soil. To use AquaLift
wipe out loose debris, pour water into the oven bottom and run the
AquaLift ® Self-Cleaning cycle. When the cycle finishes in under 1
hour at a lower temperature than traditional self-cleaning
methods, just wipe out the remaining water and loose debris. See
the "Clean Cycle" section in the Owner's Manual for more detailed
instructions. For additional information, frequently asked
questions and videos on using AquaLift
Technology, visit our website at
http://whirlpoolcorp.com/aqualift.
Surface Temperature
When the range is in use, all range surfaces may become hot,
such as the knobs and oven door.
Warming Drawer, Storage Drawer, or Baking Drawer (On
Some Models)
When the oven is in use, the drawer may become hot. Do not
store plastics, cloth, or other items that could melt or burn in the
drawer.
Oven Vent
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Do not set plastics, paper or
other items that could melt or burn near the oven vent.
INSTRUCTIONS
Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set
length of time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
1. Place prepared dough in oven. Press PROOF.
2. Press START.
3. Let the dough rise until nearly doubled in size. Proofing time may vary depending on
dough type and quantity.
4. Press CANCEL when finished proofing.
Refer to the "Proofing Bread" section for more information.
Provides the fastest preheat time for the Bake function. Rapid Preheat is preset to off, but
it can be changed to on.
1. Press RAPID PREHEAT.
2. The current setting will be displayed.
3. Press 1 to adjust the setting.
4. Press the Start or Cancel keypad to exit and display the time of day.
See the "Clean Cycle" section in the Owner's Manual.
Press REMOTE ENABLE to enable the ability to utilize the Whirlpool
Press and hold CONNECT while your router's WPS indicator light is blinking to connect
your range to your Wi-Fi network. See the "Internet Connectivity Guide" section in the
Owner's Manual for more detailed instructions.
®
Self-Cleaning Technology, simply
® Self-Cleaning

Electronic Oven Controls

Control Display
The display will flash when powered up or after a power loss.
Press CANCEL to clear. When the oven is not in use, the time of
day is displayed. If the range is in Energy Save mode, the display
will be blank when not in use.
Tones
Tones are audible signals, indicating the following:
One Tone
� Valid pad press
� Oven is preheated (long tone).
� Function has been entered.
� Reminder (on some models), repeating each minute after the
end-of-cycle tones.
Three Tones
� Invalid keypad press
Four Tones
� End of cycle
Use the Settings key to change the tone settings.
Energy Save
The Energy Save mode puts the range into Sleep mode and
reduces energy consumption.
To Activate the Energy Save Mode:
1. Press SETTINGS until "Energy saver on." appears on the
display.
2. Press 1 to enable.
To Deactivate the Energy Save Mode:
1. Press SETTINGS until "Energy saver off." appears on the
display.
2. Press 1 to disable.
® app.
3