B Trim; Auto Bpm Counter/Effector - Denon DN-S1000 Instrucciones De Operación

ENGLISH

B TRIM

9
• The Seamless Loop B points can be fine-adjusted using the Scratch Disc.
• Trim the points during loop playback as a rehearsal.
POWER ON OFF
TITLE
MEMO
PRESET
TIME
CONT.
/SINGLE
ECHO
TAP
/LOOP
FLANGER
AUTO
FILTER
DISC MODE
ON :
:
BEND
B Trim
q When the NEXT TR./B TRIM button is
pressed during seamless loop playback,
the B TRIM mode is turned on.
When the NEXT TR./B TRIM is pressed
during playback, the NEXT TRACK mode is
1
set. If the button is pressed again without
performing the NEXT TRACK mode
operation, the B TRIM mode
is selected.
Select B point
w The A button illumination
2
automatically flashes for the
last loop created or
accessed.
14
e q w, r
FLIP A1 A2 B
EXIT/
CLR A
RELOOP
NEXT TR.
/B TRIM QUICK JUMP
FAST SEARCH
TRACK SEARCH
MP3 SEARCH MODE
Trim B point
e Turn Scratch Disc slowly to
move the B point 1 frame at
a time.
• Range for trimming B point is limited as
3
follows.
B point for Loop:
NEXT TR.
/B TRIM
Between 5 frames after A point and
disc end.
*MP3
Between 5 frames after A point and file
end.
Save the B point
r Push the A button again to
A1
4
save new B point, and the
A
unit automatically exit from
the B Trim mode.
AUTO BPM COUNTER / EFFECTOR
10
AUTO BPM COUNTER
q, w, e, t
AUTO BPM COUNTER
Beats per minute (BPM) of a track is measured automatically and displayed during playback or in Cue
standby mode.
Measured BPM values are synchronized with the effector parameters such as:(ECHO/LOOP and FLANGER
time)
• When Auto BPM COUNTER is off, pushing the TAP button for 1 second, reactivates the AUTO BPM
COUNTER to turn back on.
• If you change or select a new track, the old BPM is cleared and the Auto BPM Counter starts to detect the
new track automatically.
NOTE:
AUTO BPM COUNTER might not me able to be measured correctly according to the type of music.
*If this happens, please use the TAP feature.
BPM LOCK
The data measured by the auto
BPM counter is locked.
1
q Push the TAP button once
while auto BPM counter is
operating.
"BPM Lock" is displayed for 1 second.
TAPPING
A1
The interval when the TAP
A
button is pushed repeatedly is
measured and BPM is
calculated.
2
w When you push the TAP
button, the auto BPM
counter turn off.
Push the TAP button repeatedly about
5~10 times according to the beat.
r
POWER ON OFF
TITLE
FLIP A1
CLR A
MEMO
NEXT TR.
PRESET
/B TRIM
TIME
CONT.
/SINGLE
TRACK SEARCH
MP3 SEARCH MODE
ECHO
TAP
/LOOP
AUTO
FILTER
DISC MODE
ON :
:
BEND
MANUAL INPUT
The known BPM can be dialed
TAP in directly by the numerical
value.
AUT
e The BPM manual input
mode is available when the
TAP button is pushed for
more than 2 sec. "Manual
In" is displayed is the
3
screen.
r You can input BPM value
directly with the
TAP
PARAMETERS knob.
t When the TAP button is
AUT
pushed again, the BPM
manual input mode is
turned off and the BPM is
locked to that value for that Track.
A2 B
EXIT/
RELOOP
QUICK JUMP
FAST SEARCH
PARAMETERS
PUSH
TRACK SEARCH
MP3 SEARCH MODE
TAP
AUT