Seamless Loop/Hot Start/Stutter - Denon DN-S1000 Instrucciones De Operación

SEAMLESS LOOP/HOT START/STUTTER

8
Seamless Loop/Hot Start/Stutter (A1, A2 buttons)
Operation display (refer to the
section describing the display)
POWER ON OFF
TITLE
MEMO
PRESET
TIME
CONT.
/SINGLE
ECHO
TAP
/LOOP
FLANGER
AUTO
FILTER
DISC MODE
Setting the A point (loading the Hot Start
data)
q Push the A1 or A2 button to
set the A point and Hot Start
data loading starts. A1
• A1 and A2 buttons can be
A
1 used separately for each
Hot Start.
• When an A point is set,
corresponding A button and "
display light and that button is set to the
Hot Start mode.
• The BPM is set independently for each
Hot Start automatically.
Starts Hot Start
w When A1 or A2 button is
2 A1
pushed, Hot Start playback
starts from the
A
corresponding A point.
Setting the B point for Seamless Loop
e When the B button is
pushed after setting the A
point or after starting Hot
B
start playback, the B point is
3
-1
set and Seamless Loop
playback starts from the A
point.
• The B button works with respect to the
A point operated before the B button
was pushed.
q, w, y
t, y e, y r
FLIP A1 A2 B
EXIT/
CLR A
RELOOP
NEXT TR.
/B TRIM QUICK JUMP
FAST SEARCH
TRACK SEARCH
MP3 SEARCH MODE
• If the B button is pushed during
Seamless Loop playback or after EXIT
playback, the B point moves to the point
3
-2
at which the button was pushed.
• When the B point is set, the B and "
displays light.
Playing Seamless Loops
• When the B point for A1 is detected
the
after playback started from A1 point,
"
playback returns to A1 point with
seamless. While A1 to B looping, B point
4
for A2 ignored.
• When the B point for A2 is detected
after playback started from A2 point,
playback returns to A2 point with
seamless. While A2 to B looping, B point
for A1 ignored.
Exit/Reloop
r In Seamless Loop playback,
you can force exit from or
return to the loop.
EXIT:
5
While the Seamless Loop playback, push
the EXIT/RELOOP button to exit from
loop. DN-S1000 continues playback after
the B point.
RELOOP:
When the EXIT/RELOOP button is pushed
after exit the loop, Seamless Loop
playback resumes from the A point.
Stutter
• A1 and A2 points can be also used for
Stutter playback.
t To enable stutter playback,
6 push FLIP button for A1/A2
buttons, then " " display
turns off.
Press the FLIP button to switch between
the Hot Start/Seamless Loop and Stutter
modes.
Clear the A1/A2 point
y While pressing the FLIP/(CLR) button, push
the A1 or A2 button to clear the
corresponding A and B points.
Or push the FLIP button for more than 1
sec to clear both A1 and A2 points at once.
7
Quickly pressing the "FLIP" button first
and then A1, A2 or B buttons will clear
these points individually.
FLIP
CLR
"
EXIT/
RELOOP
FLIP
CLR
A1
A
ENGLISH
13