Companion Stationary Units; Stationary Unit Components - Chart Industries Caire Companion 21 Instrucciones De Operación

COMPANION STATIONARY UNITS

Companion Stationary Unit Components
Become familiar with the various parts of the unit described below and
shown in Figure 3.
• Contents Indicator - displays the amount of liquid oxygen
remaining in the Stationary unit. It is visible through the top of the
unit.
• Pressure Gauge - (Optional) indicates the status of the pressure
inside the Stationary unit. The Stationary unit is at an acceptable
pressure when the needle is in the dark blue shaded region.
• Flow Control - (except Low Loss) adjusts oxygen flow from the
breathing oxygen supply. It must be set to the oxygen flow rate
prescribed by your physician.
NOTE: Set control to 0 to turn unit off.
• Breathing Oxygen Supply - (except Low Loss) this connector is
the point where a cannula or other type of breathing device is
connected for direct breathing from the Stationary unit. A bubble-
type humidifier may be attached to this connection before
attaching the supply tubing.
10