Royal Sovereign ARP-1314 Manual De Instrucciones página 7

Part 2: Attaching exhaust hose
1. Co n nect the hose connector to the air outlet by aligning the tabs on the hose to the PAC and snap it into place.
part 3: Installing window slider kit
1. Open the window and place the window slider on the inside edge of the window.
2. Adjust the window slider to the width of the window. For small width windows the inside slider may block the hole and need to be shortened using a plastic saw.
3. Insert a screw into the top of the window slider to secure it at the correct length.
4.∙∙ T ake∙window∙slider∙out∙and∙attach∙to∙exhaust∙hose∙by∙snapping∙the∙hose∙adapter∙into∙the∙hole∙on∙the∙window∙slider.∙∙Make∙sure∙that∙the∙tabs∙on∙the∙window∙slider∙are∙facing∙
outside.
5.∙Extend∙exhaust∙hose∙to∙desired∙length.
6. Place window slider and hose into the edge of the window.
7. Close window to secure slider.
8. Cut the foam seal to the window width and stuff the foam seal between the glass and the window.
Fig 3.
7
aRp-1314
Fig 2.
Fig 4.