Troubleshooting - Royal Sovereign ARP-1314 Manual De Instrucciones

cleaning the unit
1. Turn off the power to the unit and unplug.
2. Wipe down unit with a soft, dry, or damp cloth. A mild detergent can be used.
3. Never use a volatile substance such a gasoline or abrasive cleaners.
4. Do not splash water onto the unit.
Storing the air conditioner
If the unit will not be used for a long time, be sure to drain the air conditioner, clean the air filter, pull out the power supply plug and wrap around power cord hooks, and remove the
batteries from the remote control before storage. After draining, keep the air conditioner running on FAN mode for at least 8 hours to dry the unit completely to prevent mold.

tRoUbleSHootInG

problem
Unit does not Start when Pressing
on/off Button
Not cool enough
Noisy or vibration
Gurgling sound
Power shut off at Heating mode
error code
- e1: room temperature error
- e2: Evaporator temperature error
- e4: Display panel communication error
Unplug the unit and plug it back in. If error repeats, call for service
poSSIble caUSeS
- P1 appears in the display
-∙∙ ∙ R oom∙temperature∙is∙lower∙than∙the∙set∙temperature.(Cooling∙mode)
- The windows or doors in the room are not closed.
- There are heat sources inside the room.
-∙Exhaust∙air∙duct∙is∙not∙connected∙or∙blocked.
- Temperature setting is too high.
- Air filter is blocked by dust.
- The ground is not level or not flat enough.
- The sound comes from the flowing of the refrigerant inside the air-conditioner.
-∙∙ O verheat∙function∙has∙activated.∙∙When∙the∙temperature∙at∙the∙air∙outlet∙exceeds∙
70°C/158°F,∙the∙unit∙will∙stop.
Drain the water in the bottom tray.
Reset the temperature.
Make sure all the windows and doors are closed.
Remove the heat sources if possible.
Connect the duct and make sure it can function properly.
Decrease the set temperature.
Clean the air filter.
Place the unit on a flat, level ground if possible.
It is normal.
Let∙the∙unit∙cool∙down∙and∙then∙restart∙unit.
13
aRp-1314
SUGGeSted ReMedIeS