Charging Process - Forch 5423 75 Manual De Instrucciones

LED Work Lamp COB 2Watt Li-Ion
ENG
OPERATING MANUAL
Folding LED Work Lamp Art.-Nr. 5423 75
Please read the operating manual before using the lamp.
Operation and specification:
1 × 2 W high power COB LED (approx. 200 lm)
■
1 × 1 W LED as torch function
■
Rechargeable Li-Ion battery
■
Operation time: approx. 3 h
■
charging time: approx. 3 h
■
High strength magnet at the bottom of the lamp, the lamp is 180° adjustable
■
Two additional built-in magnets at the backside
■
Fold-out plastic hook, 360° rotatable
■
Dimensions: approx. 19,3cm × 4,9cm × 3,2cm
■
Storage temperature: -20 °C to +70 °C
■
operating temperature: -5 °C to +50 °C
■
Battery charger Input: 100 – 240 V AC 50/60 Hz
■
Battery charger Output: 5 V DC +/- 5 % 1.000 mA +/- 50 mA
■

Charging process:

The battery may only be charged with the provided battery charger of the
■
manufacturer.
Charge the lamp for 3 hours before first use.
■
Connect the charging cable (Art. No. 5423 75 2) as well as the charger
■
(Art. No. 5423 75 1 / CY0510) to the lamp; then plug the charger into an
electrical outlet.
During charging the indicator LED of the lamp lights RED.
■
After a charging time of approx. 3 hours the battery is fully charged.
■
The battery is fully charged after the RED indicator LED of the lamp turns
■
GREEN.
When the COB LED start blinking/ the indicator LED of the lamp lights RED the
■
lamp has to be charged.
Please fully charge the lamp before it is stored for a longer period.
■