Paper Information Setting Using The Utility; Paper Layout - Oki LD670 Guía De Usuario

6-2. Paper information setting using the utility

6-2-1. Paper layout

The printer shipped from the factory is configured to enable automatic
paper detection. Follow the procedure below to have the printer
automatically detect the paper layout information.
<<Procedure>>
(1) Turn on the printer power.
(2) Open the top cover.
(3) Load the paper that you want to use into the printer.
Leave the top cover open.
(4) Press and hold down the FEED switch. The POWER and ERROR lamps
blink alternately. Continue to hold down the FEED switch until the
POWER and ERROR lamps blink at the same time. At this time, release
the FEED switch.
(For details on how to initialize the paper layout, see "How to initialize
the paper layout" in Section 7-1, "Control Panel.")
(5) Close the top cover.
(6) The printer feeds the paper, automatically obtains paper layout
information, and saves the information.
Note: Automatic layout detection involves a paper feed of several tens of
centimeters. This is normal operation.
54