Description
The DC Tromb 400 is stable, tough and reliable
and particularly suited to spot extraction where
plenty and easy dust is created. The DC Tromb
400 is used for source extraction (with a maximum
constriction of Ø15 mm) in many situations, such
as grinding, welding, personal decontamination,
and cleaning.
The DC Tromb 400 is driven by 2 single phase,
two stage fans.
The extraction system functions with negative
pressure (vacuum) that draws the air through suc-
tion casings/nozzles, hose system, separator and
filter system. Coarse separation of dust occurs in
the units cyclone which is a highly efficient sepa-
rator for larger particulate. The fine dust is sepa-
rated and contained by the filter system. There is
a jacket mounted at the top of the filter cartridge
protecting it from the dust as it enters the cyclone
from the hose. Reverse pulse filter cleaning gives
long filter life and a consistently high suction capa-
city. The machine is equipped with a HEPA filter.
2018-02-23
a
L
DC Tromb 400a/c/L- 14
DC Tromb 400a
The machine is equipped with a container that can
be fitted with a plastic bag. The extracted material
can then be easily recycled or disposed of.
DC Tromb 400c:
Material which has been extracted and separated
is collected in a plastic sack. The sack can be
removed with a simple hand grip. The collected
material is easily handled in this way for disposal
or recycling.
DC Tromb 400L:
The machine is equipped with a flexible bag sys-
tem, in which the dust is collected in a permanently
closed system.
c
Part No 9480-H