Call Settings; Phone Settings; General Settings; Security Settings - Konrow Slider Guia Del Usuario

Settings

8. Call settings

Dual-SIM: You can set standby mode, reply by original SIM, set SIM name through this
function.
Call divert: This network function enables you to forward incoming calls to another number
you have previously specified.
Call waiting: After you choose Activate, the mobile phone will contact the network. A
moment later, the network will make a response and send a message to acknowledge your
operation. If the call waiting function is activated, the network will alert you and the mobile
phone screen will display the incoming call number if others are calling you while you are
already in a conversation.
Call barring: The call barring function enables you to bar calls as needed. When setting this
function, you need to use a network barring code, which can be obtained from the network
operator. If the code is wrong, an error message will be prompted on the screen. After
selecting a call barring option, continue to select Activate or Deactivate. The mobile phone
will prompt you to input the call barring code and then contact the network. A moment
later, the network will make a response and send the operation results to the mobile phone.
Hide ID: You can select hide ID, display own ID and or display ID by network.
Others: You can set call time minute reminder, auto redial, vibration when connected and
reply SMS after reject and auto call record, through this function.

Phone settings

9. General settings

Date & time: set the time, set the date, set the date format, the time format and update
time settings.
Note: If you remove the battery from the mobile phone or if the battery energy was
exhausted a long time ago, you may need to reset the date and time when re-inserting the
battery or powering on the mobile phone after recharging.
Language settings: Select the display language for the mobile phone.
Shortcut settings: Select preferred function as shortcut on screen direction key as needed.
Auto power on/off: Set the time when the mobile phone will be automatically powered
on or off.
Restore factory settings: You can cancel the setting you set. The original code is 1122.

10. Security settings

This function provides you with related settings about safety use:
PIN: To activate PIN lock, you need to input the correct PIN code. If you set PIN lock to
On, you need to input the PIN each time you power on the mobile phone. In the case you
input a wrong PIN for three consecutive times; you need to input the PIN Unblocking Key
(PUK). The PUK is used to unlock and change the locked PIN. To obtain the PUK, contact
the network operator.