Phone Settings - Konrow CHIPO 3 Guia Del Usuario

7. Making and receiving calls
NOTE: It is impossible to make or receive a call on the two SIM
cards at the same time.
For example, if you are on a call on the SIM 1 line, those
trying to contact you on SIM 2 will automatically be diverted
to voicemail.
In the standby interface, press Dial-pad enter virtual dial pad,
press number keys to input the area code and the telephone
number, and then press the dial key to dial a call.
When a call is received press the dial keys to pick up the call.
When you want to end a call, press the Hang up key.
Settings
8. Call settings
Dual-SIM: You can set standby mode, reply by original SIM, set SIM name through this
function.
Call divert: This network function enables you to forward incoming calls to another number
you have previously specified.
Call waiting: After you choose Activate, the mobile phone will contact the network. A
moment later, the network will make a response and send a message to acknowledge your
operation. If the call waiting function is activated, the network will alert you and the mobile
phone screen will display the incoming call number if others are calling you while you are
already in a conversation.
Call barring: The call barring function enables you to bar calls as needed. When setting this
function, you need to use a network barring code, which can be obtained from the network
operator. If the code is wrong, an error message will be prompted on the screen. After
selecting a call barring option, continue to select Activate or Deactivate. The mobile phone
will prompt you to input the call barring code and then contact the network. A moment
later, the network will make a response and send the operation results to the mobile phone.
Hide ID: You can select hide ID, display own ID and or display ID by network.
Others: You can set call time minute reminder, auto redial, vibration when connected and
reply SMS after reject and auto call record, through this function.

Phone settings

9. General settings
Date & time: set the time, set the date, set the date format, the time format and update
time settings.
Note: If you remove the battery from the mobile phone or if the battery energy was
exhausted a long time ago, you may need to reset the date and time when re-inserting the
battery or powering on the mobile phone after recharging.
Language settings: Select the display language for the mobile phone.
Shortcut settings: Select preferred function as shortcut on screen direction key as needed.
Auto power on/off: Set the time when the mobile phone will be automatically powered
on or off.
Restore factory settings: You can cancel the setting you set. The original code is 1122.
This menu allows you to set the wallpaper, screen saver, backlight and backlight of the
Hang up key
Dial keys
14
keyboard.
10. Security settings
This function provides you with related settings about safety use:
PIN: To activate PIN lock, you need to input the correct PIN code. If you set PIN lock to
On, you need to input the PIN each time you power on the mobile phone. In the case you
input a wrong PIN for three consecutive times; you need to input the PIN Unblocking Key
(PUK). The PUK is used to unlock and change the locked PIN. To obtain the PUK, contact
the network operator.
Modify PIN2: To change PIN2 code of PIN code.
Phone locked: The function enables you to lock/unlock the phone. Entering password to switch
on or off the phone. Password is required when the phone is locked. The initial password is 1122.
Modify the cellphone password: to change phone password.
Privacy: You can set password to protect your privacy, the initial password is 1122.
Auto keypad lock: The function enables you to lock/unlock the keypad. Set the auto locking
time, 5s, 15s, 30s, 1min and 5mins are available.
Lock screen by end-key: You can select to turn on/off this function.
Guardlock: You can set password to protect your cellphone.
Blacklist: The number which you add to blacklist cannot call you.
Contact the network operator to obtain the following network services:
11. Connections
Network account: You can manage network account through this function.
GPRS Service: You can select to turn on/off this function.
Data connection settings: The default setting is connecting when needed.
Network selection: Set Network selection mode to Automatic or Manual. Automatic is
recommended. When Network selection mode is set to Automatic, the mobile phone will
prefer the network where the SIM card is registered. When Network selection mode is set to
Manual, you need to select the network operator's network where the SIM card is registered.
12. Call log
Missed calls: You can view a list of the latest missed calls.
Note: When the mobile phone indicates that some calls are missed, you can select Read to
enter the missed calls list. Navigate to a missed call and then press the Dial key to dial the
number that originated that call.
Dialed calls: You can view the latest dialed calls. Choose dialed calls and then select a dialed
call to delete, save, dial or edit (or send a short message to it).
Received calls: You can view the latest received calls. Choose received calls and then select
a received call to delete, save, dial or edit (or send a short message to it).
Rejected calls: You can view the latest rejected calls. Choose rejected calls and then select a
rejected call to delete, save, dial or edit (or send a short message to it).
Delete all: You can delete all the latest call records.
Call timers: Choose Call timers to view the last call time, the total time of all dialed calls,
the total time of all received calls and the total time of call history or to reset all the time.
GPRS counter: You can view the data of last sent, last received, all sent and all received.
15
EN